Installation InstructionsPreference® Wall Mount Range HoodModels: PHW30 and PHW36Part No. 101745 Rev. E
8Insert two provided machine screws into the two 3. holes above the mounting bracket on the blower assembly and tighten into place.Insert two machine
9Installing the ChimneyIMPORTANT: Be careful not to pinch the electrical wires while installing the chimney.Remove the protective plastic covering fro
10Installation InstructionsInstalling the Hood WARNINGAttaching the glass range hood requires two people. Do not attempt to lift the hood without assi
11Installation InstructionsInstallation Checklist WARNINGTo ensure a safe and proper installation, the follow-•ing checklist should be completed by t
12Notes
Dacor●600AntonBlvd.Suite1000CostaMesa,CA92626●Phone:(800)793-0093●Fax:(626)403-3130●www.Dacor.com
Installation Instructions ... 5Verify the Package Contents ... 5Instal
1Important Information About Safety InstructionsThe • Important Safety Instructions and warnings in these instructions are not meant to cover all pos
2Important Safety InstructionsDo not• install or operate this hood if it has been damaged, dropped, has damaged electrical wires or is not work-ing
3Planning the LocationCarefully check the location where the hood is to be •installed. The hood should be placed for convenient access. Make certain
4Electrical Specifications WARNINGThe electrical service to the range hood should be installed only by a licensed electrician.It is the owner’s respon
5Installation InstructionsUnpack the box and verify that all parts listed have been provided. If any item is missing or damaged, please con-tact the d
6Installing the Chimney Mounting BracketDetermine the vertical center line for the range hood. 1. The center line for the hood is usually the same as
7Installing the Duct WorkIMPORTANT - The installed duct work must:Be centered on the vertical center line drawn on the ••wall.Fit flush into the hal
Commentaires sur ces manuels