Dacor AERB30G06 Manuel d'utilisateur télécharger pdf

STEP 1: Disconnect the power cord to the range. Turn off the gas at the gas supply

valve.

STEP 2: Slide the range out from the cabinet.

STEP 3: Remove the grates.

STEP 4: Remove and retain the three (3) screws on the front of the existing backguard.

STEP 5: Remove the two (2) top screws on the back of the side panels.

STEP 6: Remove the existing backguard.

Continued on back...

DANGER:

Electric shock and explosion hazard! Before installation,

disconnect the power cord and shut off the gas supply

valve.

Instructions:

Backguard Kits

AERB30G03, AERB30G06, AERB30G09

INSTALLATION

INSTRUCTIONS

RANGE MODEL: ER30G

Part No. 106191 Rev. B

WARNING: Do not disassemble the range until it has cooled.

Backguard Removal

Backguard height varies with kit

1 2

STEP 1: Disconnect the power cord to the range. Turn off the gas at the gas supply valve.STEP 2: Slide the range out from the cabinet.STEP 3: Rem

Page 2

Dacor ● 1440 Bridge Gate Drive, Diamond Bar, CA 91765 ● Tel: (800) 793-0093 ● FAX: (626) 403-3130 ● www.Dacor.comSTEP 7: Remove the protecti

Modèles reliés AERB30G03 | AERB30G09 |

Pas de commentaire