Dacor HICT305BG Manuel d'installation télécharger pdf (Page 10)

Verify the Package Contents

Verify that all these items have been included:

• DYTT Induction Glass Cooktop

• Foam tape

• Hold-down brackets (2)

• Glass scraper (PN 82499)

• Dacor Cooktop Cleaning Creme (PN A300)

• Product literature

If any item is damaged/missing, contact your dealer imme-

diately. Do not install a damaged/incomplete cooktop.

Before starting the installation, make sure you have all the

equipment you need for proper installation.

Installing the Cooktop

WARNING

If the home’s electrical service does not meet the specifications

on Pg. 3, discontinue installation. Call a licensed electrician

to install the required wiring.

IMPORTANT

• Before installing the cooktop, verify that all minimum clear-

ances are met as specified on Pg. 3.

• Do not use a hardening compound, glue, or caulk to seal the

cooktop in place. The cooktop must be easily removable for

service. Removal of improper sealant to service the unit will

be charged to the customer.

1. Peel the backing from the foam tape provided, and

attach the tape to the bottom of the cooktop mounting

surface (as near the edge of the glass as possible).

2. Keeping the cooktop centered, lower it into the cutout.

3. With the two hold-down brackets provided, secure the

cooktop to the countertop.

4. Slide the brackets into the slots on the left and right

sides of the chassis, then snug (do not overtighten) the

screws to the underside of the countertop.

Connecting the Cooktop Wiring

WARNING

• To prevent electric shock, fire hazard, or appliance damage,

turn off power at the circuit-breaker panel or fuse box before

connecting the cooktop wiring.

• Connect the cooktop’s ground (green) wire to a grounded,

metallic, permanent wiring system or grounding conductor. Do

NOT ground the appliance to a neutral (white) house-supply

wire. You must use a separate ground wire.

• The cooktop must be properly grounded per these instruc-

tions whenever power is applied.

• For aluminum house-supply wiring, splice the cooktop copper

wires to the aluminum house wiring using special connectors

designed and agency-certified for joining copper and alumi-

num. Follow the connector manufacturer’s recommended pro-

cedure carefully to avoid creating a fire hazard.

IMPORTANT

Leave slack in the conduit so the cooktop can be removed for

service.

1. At the circuit breaker or fuse box, turn off power to the

circuit to which the cooktop will be connected.

2. Feed the appliance conduit into the junction box, and

attach it using a UL-certified strain relief.

3. Following local codes, use one of the methods on the

next page to connect the appliance to the junction box.

INSTALLATION INSTRUCTIONS

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16 17 18

Commentaires sur ces manuels

Pas de commentaire

Dacor HICT305BG Manuel d'installation Page 10

Commentaires sur ces manuels

Produits connexes et manuels pour Non Dacor HICT305BG