Dacor DHW421 Spécifications

Installation InstructionsMillennia®Wall Mount Range HoodsModels: DHW301, DHW361, DHW421 and DHW482Part No. 101743 Rev. FAPPROVED FOR USE WITH ALL DACO

Connecting the Duct Work Final Chimney AssemblyWARNINGDo not use screws to attach the duct Work to the hoodexhaust outlet, Use duct tape only. Screws

4. Installation Checklist,Carefully put the chimney over the top of the ductwork extending out of the top of the hood, taking carenot to scratch the s

@YELLOW/GREE_ t h OtTO BLOWER MOTORMAIN POWERSWITCHTRANSFORMERCN1CN2 CN3CN4CN1CN5CN5LIGHT FIXTURESEXTERNAL BLOWERCONNECTIONPlease note--the layout on

@tTO BLOWERMOTOR@tTO BLOWERMOTORMAIN POWERSWITCHCN5(CN9-rlEE2EE3-I---'1t TRANSFORMERTRANSFORMERCN4 CN9t 20V _g!i_ 8zLIGHT FIXTURES OEXTERNALBLOWE

12 ctmcor

The Life of the Kitchen?Dacor • 600 Anton Blvd. Suite 1000 Costa Mesa, CA 92626 • Phone: (800) 793-0093 • Fax: (626)403-3130 • www.Dacor.com

Important Safety Instructions ... 1Important Information About Safety Instructions ... 1General Safety Precaut

Important Information AboutSafety InstructionsThe Important Safety Instructions and warnings inthese instructions are not meant to cover all possiblep

General Safety PrecautionsTo reduce the risk of fire, electric shock, serious injury or death when using your appliance, follow basic sate-precautions

PerformanceAll ModelsSpecifications600 CFM* (for single blower units)Blower1200 CFM* (for dual blower units)Blower Speeds 4 with electronic speed cont

Planning and Installingthe DuctWorkWARNING• To prevent combustion by-products, smoke or odorsfrom entering the home and to improve efficiency,tape all

WARNING• Observe all governing codes and ordinances during installation. Contact your local building department for fur-ther information.• A qualified

Installing the(Continued)Mounting3. Locate the verti-cal center line forthe hood mount-ing location onthe wall. Mark thecenter line with asix inch ver

Hanging the Range Hood1. Attach the hood junction box to the top of the hoodusing two machine screws as shown.,On models with two blowers: Put the exh