Dacor PCOR30 Manuel d'utilisateur télécharger pdf (Page 5)

Figure 8

Figure 9

Figure 10

Exhaust Damper Assembly

1. Remove and save 6 screws and fan cover bracket as shown in

Fig. 6.

2. Withdrawn hood fan unit. See Fig. 7.

3. Rotate hood fan unit/end-over-end, then rotate it 90˚ (1/4 turn)

so that exhaust ports faces toward front of oven unit. The fan

blades should be visible through the openings facing toward

the front of the oven.

4. Replace hood fan unit into oven unit as shown in Fig. 11.

5. Put the lead wire into the box.

6. Replace the fan cover bracket. If the cover does not fit prop-

erly, the hood fan unit is improperly placed. Check steps 3 and

4 again.

7. Attach the fan cover bracket to the oven unit with 6 screws as

shown in Fig. 9.

NOTE: 1.The Exhaust Damper Assembly is not required for

recirculating exhaust.

2. Charcoal Filter sold as an accessory, is required for

recirculating exhaust.

Figure 11

1 2 3 4 5 6 7 8

Pas de commentaire

Dacor PCOR30 Manuel d'utilisateur Page 5